Immersive 3D tour tools

Now that you have received your Immersive 3D tour, you can edit your tour if necessary. In this article, we will see how to use each tool available for the post-production of an Immersive 3D tour.

Map

You can see your plan with the drop-down menu.
You can return to the camera position
You can increase the map to see it bigger
You can reset the zoom
Combine with the alignment tool you will see in bird-eye view

Full Screen

This tool will increase the window, and see your 3D tour bigger.

Take a screenshot

You can choose the size of your screenshot;

1920x1080
1024x768

*The file will automatically be saved on your computer named: Immersive_3D_Tour_Screenshot_IDNUMBER.jpg

Measurement Tool

It will allow you and the viewers to measure the floor, the rooms, the furniture. You can measure Vertically, Horizontally and Diagonally.

Alignment Tool

When you add new panoramas by default they will be sent to the post-production team to be aligned. However, if you want to do it yourself you can send the request to our support team at hello@urbanimmersive.com. To do so you will need to click on each dot one at a time and align the shadow image to the element on the floor. Don't try to align with the furniture, the 360 degrees effect is distorted them.

If for some reason you need to create a second plan you can follow these steps

Click on Create new plan in the Plans section.

And to assign it to the new plan:

Click on the map
Click on each dot you wish to change (one at the time)
Select in the drop-down menu the desired plan
Save

Plan doesn't mean floors.

If you need to erase a plan:

Click on the trash cane new to the plan you wish to delete in the Plans section.

If you delete a plan all the alignment done will be erased. Be careful to keep the good plans.

Hide a Pano

If you need to hide a pano, open the alignment tool, select the pano you want to hide in the list on the left menu, and click on the eye icon.

Floor plan & Wall Editor

Virtual walls allow you to hide dots coming from other rooms, and to remove the "ghost effect", viewers cannot go through the walls, and it is also the base that creates the floorplan.

In the floor plan, you will be able to add modify or remove gateways to navigate into the house. Gateways can be used to go up or down the stairs, go inside or outside, or maybe reach a dot too far away, you can create a gateway.

To know how to create a gateway click here.
To know more about the editing floor plan click here.

General Settings

Starting position: you need to the on the dot and looking at the view you wish to set up as the starting point and click on "Set current position"
Dots height: This option will change the heights for all the dots in your 3D tour 0 is the ground and 768 is camera height
Dots Opacity: The opacity of the dots can be set up as invisible, visible or halfway.
Field of view: This will allow you to change the prior view on the panoramas. We recommend a value of 90, minimum of 30 maximum of 140
Camera pixel to meter: This number is the calibration for the measurement and floor plan tool. If you are not using 4ft high tripod/monopod contact the support at hello@urbanimmersive.com to know what number to enter in this field.
Measurement unit: The measurement tool can be displayed in meters of foot
Language: French or English
Environment Mapping
Show minimap at start
Minimap floorplan
Floorplan export
Automatic quality Upgrade: If this is activated we will increase the quality of the images if you stay on the same panorama.